Minitor V pager disassembly

The following are the steps to disassemble a Motorola Minitor V pager. Warning: We provide no technical support beyond this web page. If you attempt this procedure we will not assist you in any way, either on the phone or by e-mail. Proceed at your own risk!
After removing the clip and 4 screws, use a flat tool and gently crack open one side of the case. The rubber gasket is part of the center housing so be careful not to damage it.
Use your fingers to pull off the back. The back pulls straight off.
Use a flat tool and gently crack open one side of the front housing. The rubber gasket is part of the center housing so be careful not to damage it.
The Minitor V pager should now be in 3 pieces as shown. Warning: We provide no technical support beyond this web page. If you attempt this procedure we will not assist you in any way, either on the phone or by e-mail. Proceed at your own risk!